TECHNOVOTUM - development and production of equipment and technologies for non-destructive testing (NDT)

FEATURES ROBOSKOP VTM-5000 /LS

ROBOSKOP VTM-5000 /LS

TESTING METHODS AND PROBES (PDF)

ROBOSCOP VTM-5000 /LSincludes a robot manipulator with optical sensors, a control terminal, a motorized platform with pre-installed locating blocksfor installing and fixing of test parts, as well as a set of calibration blocks and working accessories. To perform a geometric measurement, the bogie parts are laid out on the locating blocks, and then the motorized platform moves them to the testzone, where the laser meter performs a comprehensive measurement of all bogie components in accordance with the programmed method. The obtained measurement parameters are compared with a graphical template (CAD model), and aprotocol is generated based on the results.

The ROBOSKOP VTM-5000 /LS measuring installation is programmatically reconstructed on any type of measured details if it is in a zone of reach of the measuring scanner. For non-standard designs, the measuring system is designed individually taking into account auxiliary servomekhanik. The class of accuracy of measurements is defined by model of the laser scanner integrated into system and varies in the range from 0,005-0,5 mm

ADVANTAGES OF THE TEST BENCH:

  • strict compliance with the process requirements and conditions
  • shorter test time
  • continuous test process
  • elimination of human factor
  • processing and archiving of test results